6011-2RS

BORE 55MM, OD 90MM, WIDTH 18MM
Looking for a 6011-RS?

Price: $ 12.48

6011-ZZ 

BORE 55MM, OD 90MM, WIDTH 18MM
Looking for a 6011-Z?

Price: $ 12.14

6012-2RS

BORE 60MM, OD 95MM, WIDTH 18MM
Looking for a 6012-RS?

Price: $ 15.60

6012-ZZ 

BORE 60MM, OD 95MM, WIDTH 18MM
Looking for a 6012-Z?

Price: $ 13.86

These three bearings all measure the same width but have very different inner diameters (ID) as well as outside diameters (OD). The 6011 Series has envelope dimensions of 55 x 90 x 18. The 6012 Series has envelope dimensions of 60 x 95 x 18. The 6013 Series measures in at 65 x 100 x 18. This series is normally used in applications where shaft sizes are relativley large and availability of space is a concern. These bearings are available in sealed or shielded configurations. To determine the configuration necessary for your application consider the following information. Rubber seals (2RS) are more likely used in applications in which the atmosphere is “dirtier” and the speed is not the primary concern. On the other hand, metal shields (ZZ), are better for applications where speed is the 1st priority and the environment is relatively clean.

Looking for RS and Z Series?

These bearings are enclosed (ZZ or 2RS) on both sides.  However, some manufacturers, for example, stamp 6303 RS or 6303 Z, on BOTH sides of the bearing, therefore making the complete part number 6303 2RS and 6303 ZZ, respectively.  However, if your bearing only has 1 side enclosed, then you will in fact need a 6303-RS or a 6303-Z .  Please contact us at 305-573-9855 to place an order for these type of bearings.

return to top