6000-2RS

BORE 10MM, OD 26MM, WIDTH 8MM
Looking for a 6000-RS?

Price: $ 1.38

6000-ZZ 

BORE 10MM, OD 26MM, WIDTH 8MM
Looking for a 6000-Z

Price: $ 1.16

6001-2RS

BORE 12MM, OD 28MM, WIDTH 8MM
Looking for a 6001-RS?

Price: $ 1.56

6001-ZZ 

BORE 12MM, OD 28MM, WIDTH 8MM
ooking for a 6001-Z

Price: $ 1.56

The 6000 series bearings have envelope dimensions of 10x26x8 and the 6001 series bearings have envelope dimensions of 15x28x8. The 6000 series bearings are normally used in applications where space limitations are a primary consideration and shaft sizes are relatively large. This bearing is for light-duty applications. They are available in sealed or shielded configurations. To determine the configuration necessary for your application consider the following information. The “2RS” suffix at the end of the part number denotes rubber seals. The “ZZ” denotes metal shields. Both, rubber seals and metal shields protect the rolling elements, but they serve different purposes. Rubber seals are more likely used in applications in which the atmosphere is “dirtier” and the speed is not the primary concern. On the other hand, metal shields, are better for applications where speed is the 1st priority and the environment is relatively clean.

Looking for RS and Z Series?

These bearings are enclosed (ZZ or 2RS) on both sides.  However, some manufacturers, for example, stamp 6303 RS or 6303 Z, on BOTH sides of the bearing, therefore making the complete part number 6303 2RS and 6303 ZZ, respectively.  However, if your bearing only has 1 side enclosed, then you will in fact need a 6303-RS or a 6303-Z .  Please contact us at 305-573-9855 to place an order for these type of bearings.

return to top